![]() Without this set, the tilt of your stylus won’t have any effect on the strokes of your brush. Scroll down to Stamp, select Rotation > Rotation Dynamics, then Controlled by stylus tilt. In Brush Properties, tap the Advanced tab. If you want to control the tilt of your stylus, use Scaling Percentage and Controlled by stylus tilt. What does tilt do? It controls how the stroke of the brush is drawn. To finish it off, play around with Spacing and Brush Size to perfect the loop pattern.įor creating a brush with tilt added to its stroke, use Controlled by stylus tilt and check out the Tilt section that follows. However, if you turn on Rotate to Stroke, and fine tuned the Rotation value, it hugs a circle – which is what you need for a tread profile. Using an ellipse, you can put a stroke down without Rotate to Stroke. For example, you’re trying to simulate the profile tire tread. Rotate to stroke – This can be very handy, specifically when doing concept designs with quick detailed electronics, braided hoses, springs/suspension, and materials like carbon fiber. None of the Rotation tools (see Rotation Dynamics) have any affect without an aspect ratio ( Roundness) below 100% (since the stamp would be a perfect circle). For a brush that requires rotation or simulated tilt, this is where you start. Roundness – The default for most brushes is 100%. The minimum spacing is 0.1, this will give you a very dense brush, and may slow performance. The default spacing of the Pencil is 1.2. Spacing – The distance between stamps in a single stroke. A light touch results in less and lighter paint applied to the canvas. When adding a stroke, the more pressure you apply, the faster the paint appears (and the more that appears) on the canvas. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |